marlin trigger flop trigger weight 336 35 gold trigger | 450M, 1895 45/70, 444, 30-30 or 35 Rem

Marlin Trigger Gold

Ranger Point Precision

$99.00
SKU:
29
Features::
Reduce weight to as low as 3 lbs. Eliminate trigger flop. Wider, serrated, flatter trigger.
FITS:
MARLIN 450M, 1895 45/70, 444, 336/Glenfield 30-30 or 35 Rem; Marlin 1894 357 Mag, 44 Mag, 45 Colt (and all the pistol calibers)
DOES NOT FIT:
Rossi 95 and S&W 1854 rifles that are made in the likeness of a Marlin rifle.
AUSTRALIA:
Please note that you need an import permit before we can ship (can take 2-3 weeks to get one from your government)
fbt:
related products
Red booklet Installation Instructions Red certificate Warranty info Will This Fit My Rifle
Adding to cart… The item has been added

Frequently Bought Together

Please choose options for all selected products

Product Description

Drop in universal Marlin trigger reduces trigger pull weight, removes flop; broader, flatter trigger face and angle for a more natural and comfortable trigger pull.

Please note that a two piece trigger will still have some forward travel in order to clear the lever.

Marlin Trigger Features:

  • Reduce weight down to approx 3.5# with factory hammer spring 
  • Enhanced one-piece trigger's face is .080" broader, flatter, and mildly serrated for a non-slip, comfortable pull
  • Improved trigger face angle for a more natural pull
  • Eliminates infamous "Marlin trigger flop"
  • Precision cut, black nitrided tool steel sear for lifetime durability
  • Hard anodized Marlin trigger -- gold, black, military green, and brushed aluminum (silver)
  • Single Action Shooting Society (SASS) approved

Marlin Trigger Fits The Following Models:

Marlin 1894 Calibers: .218 Bee, .22 Magnum, .25-20 Winchester, .32-20 Winchester, .32 H&R Magnum, .38 Special, .357 Magnum, .41 Magnum, .44-40 Winchester, .44 Special, .44 Magnum, 44 RIPSAW, .45 Colt

Marlin 336, 308, 444, and 1895 Calibers: 30-30, 35 Rem, 308ME, 338ME, 36 RPP, 444, 45-70, 450M 

Includes: one two-piece trigger & sear 

DISCLOSURE: Hammer, sear and potential trigger creep

The Ranger Point Marlin trigger kit addresses one side of the sear engagement equation, the sear itself. The sear mates with the hammer at a small shelf referred to as the "hammer hook." It is the height of this hammer hook--typically around 0.030"-- that determines trigger travel prior to break. The RPP sear improves pull weight by reducing the engagement angle and improving the sear surface, but no matter what we do to the sear, it must still slide all the way off that 0.030" hammer hook before trigger break occurs.

Unfortunately, reducing pull weight sometimes reveals imperfections in the hammer hook. With a heavy factory pull, so much pressure is required to move the trigger that the break occurs like a dry branch snapping--all at once. Once force is reduced it is easier to feel the whole sliding motion of the sear and hook passing each other. While these imperfections can sometimes be seen under a magnifier, there is no consistent way to dress them down. The only sure fix would be to provide a new hammer with our kit, greatly increasing the price. Another option is to work with a gunsmith to dress down the height of the hammer hook to 0.015 to 0.020". This will typically remove a lot of creepy or gritty feel from the trigger system.

Product Videos

Videos

!